2. High level of automation, easy control, and lower labor cost.
3. Highly standardized, good parts interchangeable, fast and low-cost maintenance.
4. The sand could be compacted both inside and outside according to technical requirements, which makes the sand mold better.
5. The hydraulic injection molding machine agent is sprayed automatically, which makes the demolding smoothly. casting surface glossily, and no defect in the sand mold.
6. Electric cabinet and hydraulic stations are all installed in the machine, which makes them compact and easy maintenance.
7. Low failure rate, and the machine can diagnose the failure by its own.
|Size Of Appearance Of Machine||4150*1990*3050 mm|
|Size Of Sand Mold||350*450mm/410*510mm/500*600mm/600*700mm|
|Compaction Pressure||not more than 10 Mpa|
|The Thickness Of Sand Mold||( 80~150 ) * 2 ( mm )|
|The Speed Of Manufacturing Mold||36 sec / mold|
|Machine Total Power||15 kw|
|Air Comsumption ( Normal / Mold)||0.3 m³|
|Power Supply||380V 50Hz|
|Humidity Of Sand Mold||2.8 % ~ 3.5 %|
|The Thickness Of Template||20 ~ 25 mm|